Welcome to the official website of JIANGSU STORD WORKS LTD. !
HOTLINE
0510-87585811
微信公眾號
Offical Account
明總
WeChat
官方移動平臺
Website

news

news

Structure Principle And Performance Characteristics Of Sludge Dryer

        The Performance Of The Sludge Dryer Is Very Strong, And It Can Dry All Kinds Of Sludge.The Structure Of Sludge Dryer Is Very Compact, It Covers A Very Small Area,And The Operation Steps Of Sludge Dryer Are Very Simple,In A Short Time, I Can Be Proficient In The Introduction.Now Let's Take A Look At The Basic Principle And Performance Characteristics Of The Sludge Dryer.

Construction Principle Of Sludge Dryer

      The Transfer Heating Method Is Selected For The Sludge Dryer,It Consists Of Two Leaf Axes Which Are Toothed With Each Other,With BarrierWType Shell Is Composed Of Motor Shaft And Transmission System.The Whole Drying Process Of Sludge Is Carried Out In Closed Mode,Organic Chemicals, Volatile Organic Compounds, Odor, Vapor And Moisture Are Sent To The Tail Gas Treatment Equipment According To The Induced Draft Fan Equipment In A Closed Atmosphere,And Then The Environmental Pollution To The Natural Environment Is Prevented.The Heating Material Of Sludge Dryer Is Generally Steam、High Temperature Heat Transfer Oil.The Heating Material Is Divided Into Two Paths, Which Respectively Enter Into The Shell Partition Layer And The Inner Wall Of The Blade Of The Dryer,Heat The Chamber And Blade Shaft At The Same Time,The Sludge Was Dried By Means Of Transfer Heating.After The Sludge Enters The Machine Cavity,Make The Sludge Rotate According To The Rotation Of The Blade、Mixing,And Constantly Innovate The Heating Page,Enough Contact With The Heated Body And Blade,And Then A Lot Of Moisture In The Sludge Is Volatilized,At The Same Time, The Sludge Is Transported To The Discharge Feeder With The Rotation Of The Leaf Shaft,The Dry And Well Proportioned Sludge Is Discharged From The Feeding Port.

     Performance Characteristics Of Sludge Dryer

1、The Structure Of Sludge Dryer Is Compact,It Covers A Small Area,Less Auxiliary Machinery And Equipment,Save Project Investment And Operation Cost.

2、The Transfer Heating Method Is Selected For The Sludge Dryer,The Total Area Of Heat Conduction Is Large,The Heat Damage Is Small,Heat Utilization Rate Can Reach90%Above.

3、The Wedge-shaped Blade Of Sludge Dryer Has The Ability Of Self Purification,High Efficiency Heat Conduction Can Be Maintained.

4、The Drying Humidity And Particle Size Of The Dried Sludge Are Symmetrical.

5、The Drying Process Of Sludge Dryer Has High Characteristics,Easy To Operate、Manipulation.

6、The Dried Sludge Contains High Calorific Value And Organic Chemical Composition,It Is A Kind Of Renewable Energy With Application Value,At The Same Time, Environmental Protection Regulations Should Be Implemented.


曰批全过程免费视频在线观看-四川老熟女下面又黑又肥-国产欧美久久一区二区-国内精品一区二区三区在线观看